This is due to the internal 100k pull-up resistors that cannot be disabled within the IO expander. This is why there is a difference between HIGH and LOW inputs. LOW inputs will cause current to flow ...

We used CCS Theia 1.3.1 command line for automatically building projects. Now we update the CCS Theia to 1.5.1. But we find that build command will not return error ...

I have some question s on the fueses. this is not only relates to TPS2HCS10-Q1, but in generakl for the HCS -Family. I have following questions: Standby - Active Mode of MCU eFuses must be active even ...

2)VIO pin required & supply voltage level is 3.3v 3)Should have CAN Signal improvement capability as per CiA-601-4 standard I am seeing the potential of TCAN1042-Q1. Will this work with the ...

I used cascade_radar_object_detect to capture the point cloud data from the 4-cascade 2243 radar and used TFDTP to receive the data. When I set the cascade radar's FRAME_PERIODICITY to 50ms, there was ...

Vin: I created a circuit that boots from 5V to 6.3V and converts it to 5V with a regulator, but when I connect a 100mA load, Vout drops to 5.3V. Can you catch a waveform of the unexpected Vout drop.

I have an industrial project where there will be one master controller connected to six (6) slave controllers. The physical location of the plant is such that it would be very much feasible for me to ...

i bought for my private study a launchxl-f28379D and launchxl-f280049C , i've never had an experience with that mcu's before . I'm using a CCS version 12.6.0.00008 on Win11 . I had a problem with ...

Customer run into below MMC init error in SDK 10_00_00_08, while they didn't find this error in SDK 09_02_00_05 and they can enter into kernel successfully. Could you ...

My customer is using MSP-GANG as programming tool for LP-MSPM0G3507. they faced the issue when programming, see the status below. But they are able to program MCU with XDS110, so the MCU works well.

[ 1.277602] mdio_bus 8000f00.mdio: MDIO device at address 1 is missing. [ 1.284288] davinci_mdio 8000f00.mdio: phy[0]: device 8000f00.mdio:00, driver RTL8211F Gigabit Ethernet [ 1.293743] ...

Texas Instruments (TI) Isolation support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search isolation IC content or ask ...